Clean, Check, and Tune to Big Savings.
Investing in a Tune Up package versus a 36 point inspection means you are actively taking care of your system not just looking at it. Your package includes standard cleaning, tuning, lubrication and MORE. This method of bundling commonly needed active maintenance brings big savings.
What is Active Maintenance?
Active maintenance is preventatively acting to care for your system.This includes actions such as lubricating, cleaning, and tuning – not looking. Every year you actively perform essential maintenance for your car by changing the oil. Your air conditioning and heating system, much like your car, needs these essential services. Inspections are geared toward finding worn parts so that you may replace them before they fail. They do not include active maintenance. It is the active maintenace that lenghtens system life, lowers electric bills, prevents avoidable repairs, and reclaims household comfort. Looking for a simple way to take care of all your active maintenance and get great convienance perks? Check out our comprehensive maintenance service.
Your Clean, Check, and Tune package will include the responsible foresight brought by inspection plus the great value of bundled active maintenance.
What Exactly is Included: (Fall/Winter Maintenance)
Heat Exchanger will be inspected for cracks and deterioration.
Heat exchangers can develop cracks with age. If they exist, there is a risk of serious illness or death from the toxic carbon monoxide fumes emitted.
Test Safety Warning Devices
Carbon Monoxide sensors fail with time. Regularly checking them for proper operation keeps your family truly safe.
Air filter and other indoor air quality products evaluated.
Regularly changing your filters can decrease your operating cost by 5%.
Burners cleaned.
Dirty burners can cause poor combustion. You pay for useful heat that "goes up the stack".
Thermocouple cleaned and inspected.
A defective thermocouple will cause the furnace to shut down.
Fan Switch checked and adjusted as needed.
A fan switch that is not properly adjusted can waste energy or cause nuisance fan cycling.
Pilot assembly cleaned, checked, and adjusted as necessary.
Weak or dirty pilots can easily be extinguished causing the furnace to shut down.
Safety Controls checked.
Safety controls that do not operate can cause dangerous problems.
Gas line and valve will be leak checked from the furnace shut off valve to the burners.
Undetected gas leaks are dangerous.
Combustion Air openings checked.
Blocked or restricted combustion air openings can be dangerous.
Flue pipe and venting system inspected.
Flue Pipe corrosion or leaks are dangerous.
All Panels secured.
Loose panels can increase operating costs and cause a dangerous condition.
Thermostat checked and calibrated as required.
Defective or improperly calibrated thermostats affect comfort and operating costs.
Temperatures and Performance will be recorded.
An accurate record of vital data can indicate potential problems, which can be eliminated.
Defrost Timer checked.
A defrost timer that is not working properly can cause a loss of heat and can shorten the compressor’s life.
Reversing Valve checked.
A reversing valve that is not operating properly can waste energy and cause a loss of heat.
Auxiliary Heat Strips will be checked.
Heat strips that are not operating properly can cause a loss of heat or increase electric cost higher than necessary.
Clean and inspect thermocouple.
An essential part of the checks and balances that allow your system to run safely.
Inspect and clean flame sensor.
This safety switch is essential to keeping your family and home safe.
Verify proper inducer motor operation.
Gas furnaces produce exhaust much like a car, proper venting makes sure that harmful gases are not invited inside.
Verify proper ignition.
Never a bad idea to makes sure it’s running properly before you rely on it.
Flush condensate drain to protect against overflow.
Through heavy summer operation, cleaning, and sitting dormant all year, such grows. Make sure its flushed out to prevent unpleasant surprises.
Inspect blower assembly operation, lubricate and adjust as necessary.
Being the feet of your system, proper operation is essential if you want to go anywhere.
Evaluate condition of air filters and other indoor air quality accessories.
Making sure your Indoor Air Quality upgrades are working to ensure a healthier home.
Evaluate the overall efficiency of the system and inform customer of equipment condition.
Your system is an investment in your comfort and energy costs. Knowing its status can save you thousands.